$25 Off Orders Over $150
  • Home
  • Extreme Chassis Black Gloss - How To Use Instructions & Buyers Guide

Extreme Chassis Black Paint

Application & Guidelines

Extreme Chassis Black High Gloss Quart

3X MORE DURABLE than Original Chassis Black

Maximum Solvent and Chip Resistance

Average Coverage: 1 Quart = 40 sq. ft


  1. 1.Surface must be clean and dry before painting. Use Eastwood PRE Painting Prep (10041Z) to remove grease and oil. Can be used over bare metal or over primer. For increased adhesion and durability, prime clean, bare metal with Extreme Chassis Black Primer. If making spot repairs, feather-edge by sanding original finish. Do not use Extreme Chassis Black Primer over new enamel.Cover firmly adhering rust with Eastwood Rust Encapsulator, wait 15 minutes to 36 hours (scuff surface beyond 36 hours with 320 grit) and topcoat with Extreme Chassis Black. Do not use over self-etching primers. Test for compatibility if not using over Extreme Chassis Black Primer or Eastwood Rust Encapsulator. For best results, use when paint and surface are between 70° and 90°F (21° and 32°C), 50% or less humidity.

  2. 2. Stir for at least 1 minute before use, or shake aerosol can for 2 minutes. If desired, further thin with Toluol or Xylol.

  3. 3. For Spray-on Application: several light coats give a better finish than one heavy coat. Contents are thinned to sprayable consistency. Apply only enough paint to achieve full hiding. For faster cure, apply a maximum of 2 coats primer and 2 coats Extreme Chassis Black®. Allow 24 hours between coats.

  4. 4. Finished article should be allowed to dry 48-72 hours before being handled.

CONTAINS: Stoddard Solvent 8052-41-3, Acetone 67-64-1, Xylene 1330-20-7, and Carbon Black 1333-86-4 (liqiud).

n-Hexane 110-54-3, Liquefied Petroleum Gas 68476-85-7, Stoddard Solvent 8052-41-3, Xylene 1330-20-7, Acetone 67-64-1, t-Butyl Acetate 540-88-5, and Carbon Black 1333-86-4 (aerosol).

t-Butyl Acetate 540-88-5, Oxibismethane 115-10-6, Xylene 1330-20-7, PM Acetate 108-65-6, Liquefied Petroleum Gas 68476- 85-7, Butyl Cellosolve 111-76-2, Carbon Black 1333-86-4, Stoddard Solvent 8052-41-3, and Ethyl Benzene 100-41-4 (primer).

DANGER: FLAMMABLE LIQUID AND VAPOR. Keep away from heat, sparks and flames. Do not store above 120°F. Harmful or fatal if swallowed. Vapor harmful. Use only with adequate ventilation. Avoid contact with eyes and prolonged or repeated contact with skin.

FIRST AID: In case of eye contact, flush thoroughly with water for 15 minutes and get medical attention. For skin contact, wash with soap and water. If overcome by vapors, remove to fresh air. If swallowed, do not induce vomiting, contact physician immediately.

WARNING: This product contains chemicals known to the State of California to cause cancer.


For spills, leaks, fire, or exposure call day or night:
CHEMTREC 1-800-424-9300 (USA toll-free) (202) 483-7616 (Intnl.-collect)